At present, the glove machine that appears on the market is a kind of knitting machine that appears modern, can produce all sorts of half finger, whole finger glove, 5 toe socks and labor insurance glove according to need commonly. Many adults should know that the machine will break down after long use, in order to improve the efficiency of the machine, so understand the glove machine fault maintenance method is very necessary. Here are some simple fixes.

1, the firing pin

Bumping needle is a kind of fault that often appears inside braid machinery, although layman seldom heard of, but its can produce important effect to machine use, therefore should avoid to appear bumping needle phenomenon when using. The use of woven gloves in our life is now very much, and the production of its glove knitting machine is constantly used by manufacturers. In the process of glove knitting, mechanical failure is often caused by the collision between the heel of knitting needles and each knitting triangle, which is what we call the bumping needle. For such a fault, the glove knitting machine is very vulnerable to damage, so the occurrence has been immediately resolved, so as to avoid excessive mechanical damage. Therefore, the manufacturer of glove knitting machine must often check, repair or know how to deal with the problem of the bumping needle, so as to avoid the occurrence of the failure of the bumping needle.

2. Break the upper needle bend

Many cotton glove manufacturers will encounter the fault that the upper bending-thread often breaks, and there are two main reasons for this fault. One is that the stitching is wrong or the pressure of the lower bending-thread clamp plate is too high. For the fault caused by this reason, attention should be paid to threading securities or loosening some upper bending-thread clamp nuts. The second reason is the hair in the upper bent needle eye. If this is the reason, you should apply the polishing paste with the string and pull the polish through the upper bent needle eye. Or just change a bent pin.

Above, is about a lot of people in the face of the glove machine fault will be at a loss, in fact, a lot of simple problems are worth everyone to pay attention to the topic, for this equipment is not necessarily bad maintenance, we are not the truth!

Ruian Huarui Machinery Co., LTD specializes in the production of glove machines, more related products please pay attention to the official website m.garywong.cn